Netgear FVS336G-300NAS Specifications download pdf (Page 471)

100

101

Set Up Virtual Private Networking with SSL Connections

471

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

resources. But for most organizations, NETGEAR recommends that you use network

resources. If your server or network configuration changes, you can perform an update

quickly by using network resources instead of individually updating all of the user and group

policies.

Add an SSL Network Resource

The resource name and service are independent of the IP version. However, the resource

definition (see

Define or Change an IPv4 or IPv6 Network Resource and Resource Address

on page 472) depends on the IP version because you can assign either an IPv4 or an IPv6

address or network.

 To add an IPv4 or IPv6 SSL network resource:

1. On your computer, launch an Internet browser.

2. In the address field of your browser, enter the IP address that was assigned to the VPN

firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

3. In the Username field, type your user name and in the Password / Passcode field, type

your password.

For the default administrative account, the default user name is admin and the default

password is password.

4. If you changed the default domain or were assigned a domain, from the Domain menu,

select the domain.

If you did not change the domain or were not assigned a domain, leave the menu

selection at geardomain.

5. Click the Login button.

The Router Status screen displays.

6. Select VPN > SSL VPN > Resources.

The Resources screen displays. The following figure shows some resources in the List of

Resources table as an example.

1 2 ... 466 467 468 469 470 471 472 473 474 475 476 ... 692 693

Comments to this Manuals

No comments

Netgear FVS336G-300NAS Specifications Page 471

Comments to this Manuals