Netgear FVS336G-300NAS Specifications download pdf (Page 147)

100

101

Configure the IPv4 LAN Settings

147

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

The Add Static Route screen displays.

8. Enter the settings as described in the following table.

9. Click the Apply button.

Your settings are saved. The new static route is added to the Static Routes table.

Setting Description

Route Name The route name for the static route (for purposes of identification and

management).

Active To make the static route effective, select the Active check box.

Note: You can add a route to the table and make the route inactive if you do not

need it. This allows you to use routes as needed without deleting and re-adding the

entries. An inactive route is not advertised if RIP is enabled.

Private If you want to limit access to the LAN only, select the Private check box. Doing so

prevents the static route from being advertised in RIP.

Destination IP Address The destination IP address of the host or network to which the route leads.

Subnet Mask The IP subnet mask of the host or network to which the route leads. If the

destination is a single host, enter 255.255.255.255.

Interface From the menu, select the physical or virtual network interface (the WAN1 or

WAN2 interface, a VLAN, or the DMZ interface) through which the route is

accessible.

Gateway IP Address The gateway IP address through which the destination host or network can be

reached.

Metric The priority of the route. Select a value between 2 and 15. If multiple routes to the

same destination exist, the route with the lowest metric is used.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 692 693

Comments to this Manuals

No comments

Netgear FVS336G-300NAS Specifications Page 147

Comments to this Manuals