Netgear FVS336G-300NAS Specifications Page 472

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 471
Set Up Virtual Private Networking with SSL Connections
472
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
7. In the Add New Resource section, specify the following information:
Resource Name. A descriptive name of the resource for identification and
management purposes.
Service. From the Service menu, select the type of service to which the resource
applies:
- VPN Tunnel. The resource applies only to a VPN tunnel.
- Port Forwarding. The resource applies only to port forwarding.
- All. The resource applies both to a VPN tunnel and to port forwarding.
8. Click the Add button.
The new resource is added to the List of Resources table.
Define or Change an IPv4 or IPv6 Network Resource and Resource Address
After you add a network resource (see Add an SSL Network Resource on page 471), you
must define an IP address, or FQDN, or IP network IP and services (port numbers) for the
resource.
To define or change a network resources and resource address:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
Page view 471
1 2 ... 467 468 469 470 471 472 473 474 475 476 477 ... 692 693

Comments to this Manuals

No comments