Diagnostics and Troubleshooting
626
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
correctly. If you have just completed configuring the VPN firewall, wait at least five
minutes, and check the date and time again.
• Time is off by one hour. Cause: The VPN firewall does not automatically detect daylight
saving time.
To configure the VPN firewall to detect daylight saving time:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Administration > Time Zone.
The Time Zone screen displays.
7. Select the Automatically Adjust for Daylight Savings Time check box.
8. Click the Apply button.
Your settings are saved.
Access Documentation from the Web Management
Interface
From the web management interface, you can access the online documentation library for
your VPN firewall model.
To access NETGEAR’s documentation library for your VPN firewall model:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
Comments to this Manuals