Netgear FVS336G-300NAS Specifications download pdf (Page 148)

100

101

Configure the IPv4 LAN Settings

148

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

Change a Static IPv4 Route

The following procedure describes how to change an existing IPv4 static route.

 To change an IPv4 static route:

1. On your computer, launch an Internet browser.

2. In the address field of your browser, enter the IP address that was assigned to the VPN

firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

3. In the Username field, type your user name and in the Password / Passcode field, type

your password.

For the default administrative account, the default user name is admin and the default

password is password.

4. If you changed the default domain or were assigned a domain, from the Domain menu,

select the domain.

If you did not change the domain or were not assigned a domain, leave the menu

selection at geardomain.

5. Click the Login button.

The Router Status screen displays.

6. Select Network Configuration > Routing.

The Static Routing screen displays the IPv4 settings.

7. In the Static Routes table, click the Edit button for the route that you want to change.

The Edit Static Route screen displays.

8. Change the settings.

For information about the settings, see Add a Static IPv4 Route on page 146.

9. Click the Apply button.

Your settings are saved. The modified route displays in the Static Routes table on the

Static Routes screen.

Remove One or More Static IPv4 Routes

The following procedure describes how to remove one or more existing IPv4 static routes that

you no longer need.

 To remove one or more static IPv4 routes:

1. On your computer, launch an Internet browser.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 692 693

Comments to this Manuals

No comments

Netgear FVS336G-300NAS Specifications Page 148

Comments to this Manuals