Monitor System Access and Performance
605
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
View the DHCP Log
The following procedure describes how to view and clear the DHCP log.
Note: For information about how to change the DHCP settings, see Manage
VLAN Profiles on page 121.
To view the most recent entries in the DHCP log or clear the log:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN Setup screen displays the IPv4 settings.
7. Click the DHCP Log option arrow in the upper right.
The DHCP Log screen displays.
Comments to this Manuals