Netgear FVS336G-300NAS Specifications download pdf (Page 499)

100

101

Manage Users, Authentication, and VPN Certificates

499

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

IMPORTANT:

When you add a domain, the VPN firewall creates a group with the

same name as the new domain automatically. You cannot remove

such a group. However, when you remove the domain with which

the group is associated, the group is removed automatically.

Note: Authentication groups are different from LAN groups that you use to

simplify firewall policies. For information about LAN groups, see

Manage IPv4 LAN Groups and Hosts on page 133.

Add an Authentication Group

The following procedure describes how to manually add an authentication group.

 To add a group:

1. On your computer, launch an Internet browser.

2. In the address field of your browser, enter the IP address that was assigned to the VPN

firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

3. In the Username field, type your user name and in the Password / Passcode field, type

your password.

For the default administrative account, the default user name is admin and the default

password is password.

4. If you changed the default domain or were assigned a domain, from the Domain menu,

select the domain.

If you did not change the domain or were not assigned a domain, leave the menu

selection at geardomain.

5. Click the Login button.

The Router Status screen displays.

6. Select Users > Groups.

The Groups screen displays. The following figure shows the VPN firewall’s default

group—geardomain—and, as an example, several other groups in the List of Groups

table.

1 2 ... 494 495 496 497 498 499 500 501 502 503 504 ... 692 693

Comments to this Manuals

No comments

Netgear FVS336G-300NAS Specifications Page 499

Comments to this Manuals