Netgear FVS336G-300NAS Specifications download pdf (Page 287)

100

101

Customize Firewall Protection

287

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

single firewall rule. For example, in a configuration with 10 web servers, each of which

requires the same three port-forwarding rules, you can create a service group for the

port-forwarding rules and an IP group for the web servers (see

Manage IP Address Groups

on page 290) and then create only one firewall rule.

Add a Service Group

The following procedure describes how to add a service group that you then can use as an

object for a firewall rule.

 To add a service group:

1. On your computer, launch an Internet browser.

2. In the address field of your browser, enter the IP address that was assigned to the VPN

firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

3. In the Username field, type your user name and in the Password / Passcode field, type

your password.

For the default administrative account, the default user name is admin and the default

password is password.

4. If you changed the default domain or were assigned a domain, from the Domain menu,

select the domain.

If you did not change the domain or were not assigned a domain, leave the menu

selection at geardomain.

5. Click the Login button.

The Router Status screen displays.

6. Select Network Security > Services > Service Groups.

The Service Groups screen displays. The following figure shows an example.

7. Under the Custom Service Group table, click the Add button.

The Add Service Group screen displays.

1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 692 693

Comments to this Manuals

No comments

Netgear FVS336G-300NAS Specifications Page 287

Comments to this Manuals