Netgear FVS336G-300NAS Specifications Page 542

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 541
Optimize Performance and Manage Your System
542
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
Use a Simple Network Management Protocol Manager
Simple Network Management Protocol (SNMP) lets you monitor and manage the VPN
firewall from an SNMP manager. The following sections provide information about using an
SNMP manager:
SNMP Overview
Set Up an SNMP Configuration and Specify the Trap Events
Change an SNMP Configuration
Remove One or More SNMP Configurations
View SNMPv3 Default Users and Change the Security for an SNMPv3 User
Configure the SNMP System Information
SNMP Overview
SNMP forms part of the Internet Protocol Suite as defined by the Internet Engineering Task
Force (IETF). SNMP is used in network management systems such as the NETGEAR
ProSAFE Network Management Software (NMS300) to monitor network-attached devices for
conditions that warrant administrative attention.
SNMP exposes management data in the form of variables on the managed systems, which
describe the system configuration. These variables can then be queried (and sometimes set)
by managing applications.
SNMP provides a remote means to monitor and control network devices and to manage
configurations, statistics collection, performance, and security. The VPN firewall supports
SNMPv1, SNMPv2c, and SNMPv3.
Set Up an SNMP Configuration and Specify the Trap Events
The following procedure describes how to set up an SNMP configuration and specify the trap
events.
To set up an SNMP configuration and specify the trap events:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
Page view 541
1 2 ... 537 538 539 540 541 542 543 544 545 546 547 ... 692 693

Comments to this Manuals

No comments