Netgear FVS336G-300NAS Specifications Page 424

  • Download
  • Add to my manuals
  • Print
  • Page
    / 693
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 423
Set Up Virtual Private Networking With IPSec Connections
424
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
7. To disable an active PPTP user, in the List of PPTP Active Users table, click the
corresponding Disconnect button.
The user is disconnected.
8. To disable another active PPTP user, repeat Step 7.
Manage the L2TP Server
The following sections provide information about how to manage the L2TP server:
L2TP Servers Overview
Enable and Configure the L2TP Server
View the Active L2TP Users and Disconnect Active Users
L2TP Servers Overview
As an alternate to IPSec VPN tunnels, you can configure a Layer 2 Tunneling Protocol
(L2TP) server on the VPN firewall to allow users to access L2TP clients over L2TP tunnels. A
maximum of 25 simultaneous L2TP user sessions are supported. (The very first IP address of
the L2TP address pool is used for distribution to the VPN firewall.)
An L2TP Access Concentrator (LAC) typically initiates a tunnel to fulfill a connection request
from an L2TP user; the L2TP server accommodates the tunnel request. After an L2TP tunnel
is established, the L2TP user can connect to an L2TP client that is located behind the VPN
firewall.
Note: IPSec VPN provides stronger authentication and encryption than
L2TP. (Packets that traverse the L2TP tunnel are not encapsulated by
IPSec.)
You must enable the L2TP server on the VPN firewall, specify an L2TP server address pool,
and create L2TP user accounts. (L2TP users are authenticated through local authentication
with geardomain.) For information about how to create L2TP user accounts, see
Manage
User Accounts on page 502.
Enable and Configure the L2TP Server
The following procedure describes how to enable and configure the L2TP server.
PPTP IP The IP address that is assigned by the PPTP server on the VPN firewall.
Action The Disconnect button lets you terminate an active PPTP connection. (This button
displays only if an active PPTP connection exists.)
Item Description
Page view 423
1 2 ... 419 420 421 422 423 424 425 426 427 428 429 ... 692 693

Comments to this Manuals

No comments