Netgear FVS336G-300NAS Specifications download pdf (Page 603)

100

101

Monitor System Access and Performance

603

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

The incoming and outgoing volume of traffic for each protocol and the total volume of

traffic are displayed. Traffic counters are updated in MBs; the counter starts only when

traffic passed is at least 1 MB. In addition, the pop-up screen displays the traffic meter’s

start and end dates. If you did not configure the traffic meter, the start date is blank.

View the Attached Devices

You can view the network database (which is also referred to as the Known PCs and Devices

table), which contains all IP devices that VPN firewall has discovered on the local network.

Note: If you reboot the VPN firewall, the data in the Known PCs and

Devices table is lost until the VPN firewall rediscovers the devices.

 To view the attached devices:

1. On your computer, launch an Internet browser.

2. In the address field of your browser, enter the IP address that was assigned to the VPN

firewall during the installation process.

The VPN firewall factory default IP address is 192.168.1.1.

The NETGEAR Configuration Manager Login screen displays.

3. In the Username field, type your user name and in the Password / Passcode field, type

your password.

For the default administrative account, the default user name is admin and the default

password is password.

4. If you changed the default domain or were assigned a domain, from the Domain menu,

select the domain.

If you did not change the domain or were not assigned a domain, leave the menu

selection at geardomain.

5. Click the Login button.

1 2 ... 598 599 600 601 602 603 604 605 606 607 608 ... 692 693

Comments to this Manuals

No comments

Netgear FVS336G-300NAS Specifications Page 603

Comments to this Manuals