Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 107)

700 Series Managed Switch User’s Guide for Software v2.1

Command Line Interface 6-17

SM-10004-02

Where

<interface type> = Options for this field include gbic and tp.

Shutdown

The shutdown command let you shutdown this particular interface. You can reverse this

command by using the

no shutdown command.

Syntax

FSM726(config-if)# Shutdown

Spanning Tree

The spanning-tree command lets you configure the variables of the port that affects its

spanning-tree operation, items such as port cost and priority is configured through this command.

Syntax

FSM726(config-if)# spanning-tree [cost <1-65535> | port-priority <0-255> | fastlink ]

Where

Cost <1-65535> = the cost of the port, ranges from 1-65535

port-priority <0-255> = the priority of the port, ranges from 0-255

fastlink = enables Fastlink, a mode that bypasses the listening & learning phase of Spanning

Tree

Speed

Syntax

FSM726(config-if)# speed <speed>

Where

<speed> = the speed of the port. The options are 10, 100, 1000, or auto (for automatic speed

configuration).

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 107