Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 81)

700 Series Managed Switch User’s Guide for Software v2.1

Web-Based Management Interface 5-31

SM-10004-02

Advanced> VLAN> Primary VLAN

Figure 5-32: Primary VLAN

A ‘U’ or ‘T’ will be displayed for each port assigned to the VLAN, where ‘U’ stands for untagged

and ‘T’ for tagged. If a port is an untagged member of a VLAN, the VLAN tag will be striped from

the frame before it is sent out that port. If the port is a tagged member of a VLAN, the VLAN tag

will stay in the frame when it is sent. A blank indicates that the port is not a member of the

particular VLAN, and will not get any traffic for that VLAN. The VLAN tagging option is a

standard set by the IEEE to facilitate the spanning of VLANs across multiple switches (Reference:

Appendix B and IEEE Std 802.1Q-1998 Virtual Bridged Local Area Networks).

From this menu, you can create a new VLAN, add new ports to an existing VLAN, remove ports

from an existing VLAN or, delete a VLAN.

Create a new VLAN Group

Under the ‘Show VLAN’ drop down menu, select ‘Add a new VLAN’.

Enter the VLAN Id and name in the provided fields.

Add VLAN members if so desired. (See below).

Click Apply.

Delete a VLAN Group

Check the Remove VLAN box for the VLAN you want to remove.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 81