Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 91)

Command Line Interface 6-1

SM-10004-02

Chapter 6

Command Line Interface

The 700 Series Managed Switch features a Command Line Interface (CLI) designed for expert

users who are familiar with common CLIs in use in the market. The CLI follows a tiered structure,

enabling different commands at different levels or sections of the CLI.

Manual Syntax

Before discussing the details of the CLI operation, the syntax of the CLI commands used in this

manual are listed below:

• The CLI syntax is presented in bold ariel text with the 700 Series Managed switch model

number followed by a “#”, such as in this example:

FSM726# show spanning-tree interface ethernet <x/y>

• In a paragraph with other text, command keywords included are in regular courier font.

• The required fields in a command are enclosed in angle brackets (<>), for instance, system

password <password>

• The optional field in a command are enclosed in square brackets ([]), for instance,

system radius authen-mode [local | local-then-remote | remote]

• Command refers to a command used in the command line interface (CI Command)

Entering the CLI

The CLI is an option within the Command Menu Interface (CMI), so you must be using either the

console port or a telnet session to use the CLI. See chapter 3 on connecting to the CMI. Once in

the CMI, select Advanced, then Command Line. You will see a prompt similar to this. This is

known as the root prompt.

FSM726#

Note: Your prompt may look different if you gave your switch a different name.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 91