Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 30)

700 Series Managed Switch User’s Guide for Software v2.1

4-10 Administration Console Telnet Interface

SM-10004-02

Gigabit Ports. For the gigabit ports on each switch, the port type may be chosen. The default is

that the port uses the RJ-45 interface (GT). You can select the GBIC interface (GB) by switching

the port type from ‘GT’ to ‘GB’. This can be done by hitting the space bar when the cursor is on

the port number.

Note: enabling the GBIC connector for a Gigabit Ethernet port disables the built-in 1000BASE-T

port. GBIC ports do not support Auto Negotiation. You must manually configure the GBIC port.

The default values are 1000 Mbps, full duplex

Main Menu> Set-Up> GBIC

On this page, you can set up the port characteristics related to GBIC or copper media.

Figure 4-13: GBIC Port Configuration

All of the parameters on this page are toggle settings. To change, or toggle, between options, hit

Ctrl-M to move the curser to the ports field and simply strike the space bar when the appropriate

option is highlighted.

Main Menu> Tools

These system tools are provided:

• Save Configuration to NVRAM

• Restore Factory Values

• Reset Switch

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 30