Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 41)

700 Series Managed Switch User’s Guide for Software v2.1

Administration Console Telnet Interface 4-21

SM-10004-02

Figure 4-28: VLAN Administration

To add a VLAN, enter a unique numeric VLAN ID and then enter a unique VLAN name.

To remove a port or an entire VLAN, just press Ctrl-X anywhere on the line of the VLAN.

Main Menu> Advanced> VLANS> VLAN Membership

This matrix allows for real time management of up to 64 VLANs.

Figure 4-29: VLAN Membership

To add a port to a VLAN, position the cursor in the desired matrix location and toggle the options

with the SPACE bar.

A ‘U’ or ‘T’ will be displayed for each port assigned to the VLAN, where ‘U’ stands for untagged

and ‘T’ for tagged. If a port is an untagged member of a VLAN, the VLAN tag will be striped

from the frame before it is sent out that port. If the port is a tagged member of a VLAN, the

VLAN tag will stay in the frame when it is sent. A ‘_’ space indicates that the port is not a

member of the particular VLAN, and will not receive or forward any traffic for that VLAN. VLAN

tagging is a standard set by the IEEE to facilitate the spanning of VLANs across multiple switches.

(Reference: Appendix B and IEEE Std 802.1Q-1998 Virtual Bridged Local Area Networks).

Main Menu> Advanced> VLANS> VLAN Ports

All untagged packets entering the switch will by default be tagged with the ID specified by the

port’s PVID.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 41