Netgear WNAP320 User's Guide download pdf (Page 96)

96 | Chapter 5. Advanced Configuration

ProSafe Wireless-N Access Point WNAP320 Reference Manual

Configure the Wireless Access Point for Client Mode

In client mode, the wireless access point operates as a client bridge only and sends all traffic

to the selected remote wireless access point or peer device.

To configure the wireless access point for client mode:

1. Select Configuration

> Wireless Bridge. The Bridging screen displays:

Figure 60.

2. Select the Enable Wireless Bridging check box. The Local MAC Address field is a

nonconfigurable field that shows the MAC address of the wireless access point.

3. Select the Client

radio button. (The Edit button becomes nonoperational after you have

selected the Client button.)

4. As

an option, you can now enable MAC cloning, which allows only wireless connections to

computers or wireless stations for which you have added the MAC address to the

Trusted Wireless Stations table. For more information, see Restrict Wireless Access by

MAC Address on p

age 50.

To enable MAC cloning:

a. Next t

o MAC Clone, select the Enable radio button. By default, the Disable radio

button is selected.

b. In the MAC

Clone Address field, enter the MAC address.

5. Click Apply to save

your settings.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 125 126

No comments

Netgear WNAP320 User's Guide Page 96