Netgear WNAP320 User's Guide download pdf (Page 89)

Chapter 5. Advanced Configuration | 89

ProSafe Wireless-N Access Point WNAP320 Reference Manual

To configure a point-to-multipoint wireless network:

1. Con

figure the security profiles on the wireless access point (AP1 on LAN Segment 1 in

the previous figure):

a. Select Co

nfiguration > Wireless Bridge. The Bridging screen displays:

Figure 55.

b. Select the Enable Wireless Bridging check box. The Local MAC Address field is a

nonconfigurable field that shows the MAC address of the wireless access point.

c. Select

the Wireless Point-to-Multi-Point Bridge radio button.

d. T

he profile table shows four security profiles. Choose a security profile to edit by

selecting the corresponding radio button to the left of the profile.

e. Click Edit to con

figure the selected security profile settings. The Edit Security Profile

screen displays for the selected security profile. (The following figure contains some

examples.)

Figure 56.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 125 126

No comments

Netgear WNAP320 User's Guide Page 89