Netgear WN203 Installation Guide

Browse online or download Installation Guide for WLAN access points Netgear WN203. Netgear WN203 Installation Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Installation Guide
ProSAFE® Single Band 802.11n Wireless Access Point WN203
Follow the instructions in this installation guide to set up your ProSAFE® Single
Band 802.11n Wireless Access Point WN203. For information about advanced
configuration options, see the reference manual.
Note: In this installation guide, the Wireless Access Point WN203 is referred to as
the access point.
Package Contents
Unpack the box and verify the contents:
Wireless Access Point WN203
Straight-through Category 5 Ethernet cable
Power adapter and cord (12V, 1A)
Stand
Two wall mount screws and anchors
Resource CD
Installation guide
Set Up the Access Point
Setting up the access point consists of three short procedures:
Connect the access point to your computer.
Configure the LAN and wireless access settings.
Test wireless connectivity.
Estimated total time for these procedures: 10 minutes.
Tip: Before you mount the access point in a high location, first set up and
test the access point to verify wireless network connectivity.
Connect the Access Point to Your Computer
1. Prepare a computer with an Ethernet adapter:
a. If this computer is already part of your network, record its TCP/IP
configuration settings.
b. Configure the
computer with a static
IP address of
192.168.0.210 and a
subnet mask of
255.255.255.0.
2. Insert an Ethernet cable
in the Ethernet port of
the computer (point A in
the illustration).
3. Securely insert the other
end of the cable into the
Ethernet LAN port on the
back panel of the access
point (point B in the
illustration).
4. Connect the power
adapter to the access
point and plug the power
adapter into a power
outlet.
5. Verify the following:
Power LED. The Power LED is green. If the Power LED is off, check the
connections, and check if the power outlet is controlled by a wall switch
that is turned off.
Test LED. The Test LED blinks amber at startup and turns off after about
one minute.
LAN LED. The LAN LED indicates LAN speeds: green for 1000 Mbps,
amber for 100 Mbps or 10 Mbps. If no link is detected, the LAN LED is off.
WLAN LED. The WLAN LED is blue, indicating that the wireless LAN
(WLAN) is ready.
A
B
B
LAN port
Console port
Power connector
Configure the LAN and Wireless Access Settings
1. On the computer that is connected to the access point, enter
http://192.168.0.100 in the address field of a browser.
A login window displays.
2. Enter admin for the user name and
password for the password, both in
lowercase letters.
The web management interface of the
access point displays. The menu lets
you navigate to the various screens.
3. Select Configuration > System > Basic > General from the menu.
a. In the Access Point Name field, enter a unique name or leave the default
name.
b. From the Country/Region drop-down list, select the country where the
access point is installed.
c. Click Apply.
4. Select Configuration > IP > IP Settings from the menu.
By default, the access point has a static IP address of 192.168.0.100 with a
subnet mask of 255.255.255.0, and the DHCP client is disabled.
a. Configure the IP settings for your LAN.
b. Click Apply.
Tip: If you configure the access point as a DHCP client, reserve an
IP address on the DHCP server in your network by binding the
access point’s MAC address to the IP address that is issued by
the DHCP server. The next time that you log in to the access
point, you need to use the reserved IP address.
5. Select Configuration > Security > Profile Settings from the menu.
a. Configure one or more security profiles for your wireless network.
b. After configuring each security profile, click Apply.
Note: By default, the wireless radio is on and the default wireless mode is ng (that
is, 802.11ng).
Note: The online help and the reference manual provide more information about the
configuration options.
Page view 0
1 2

Summary of Contents

Page 1 - Set Up the Access Point

Installation GuideProSAFE® Single Band 802.11n Wireless Access Point WN203Follow the instructions in this installation guide to set up your ProSAFE® S

Page 2 - Troubleshooting Tips

June 2013NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries i

Comments to this Manuals

No comments