Netgear WNAP320 User's Guide download pdf (Page 107)

Appendix A. Supplemental Information | 107

ProSafe Wireless-N Access Point WNAP320 Reference Manual

Factory Default Settings

You can use the Reset button located on the rear of the wireless access point to reset all

settings to their factory defaults. This is called a hard reset.

• T

o perform a hard reset, use a sharp object to push and hold the Reset button for

approximately 5 seconds (until the Test LED blinks rapidly). This returns the wireless

ccess point to the factory configuration settings that are shown in the following table.

Note: Pressing the Reset button for a shorter period of time simply causes

the wireless access point to reboot.

Environmental

specifications

Operating temperature: 0 to 55° C (32 to 131° F)

Operating humidity: 10–9%, noncondensing

Electromagnetic

mpliance

FCC Part 15 Class B and Class E, CE, and C-TICK

Table 30. ProSafe Wireless-N Access Point WNAP320 Default Configuration Settings

Feature Description

User login URL 192.168.0.100

User name (case-sensitive) admin

Ethernet Connection

Static IP address 192.168.0.210

Ethernet MAC address See bottom label.

Port speed 10/100/1000

Table 29. ProSafe Wireless-N Access Point WNAP320 Technical Specifications

Feature Description

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 125 126

No comments

Netgear WNAP320 User's Guide Page 107