Netgear WNAP320 User's Guide download pdf (Page 48)

48 | Chapter 3. Wireless Configuration and Security

ProSafe Wireless-N Access Point WNAP320 Reference Manual

Configure RADIUS Server Settings

For authentication, accounting, or both authentication and accounting using RADIUS, you

must configure primary servers and optional secondary servers. These RADIUS server

settings can apply to all devices that are connected to the wireless access point.

To configure the RADIUS server settings:

1. Select Configuration

> Security > Advanced > Radius Server Settings. The Radius

Server Settings screen displays. (The following figure shows some examples.)

Figure 25.

Passphrase Enter a passphrase. The passphrase length must be between 8 and 63 characters

(inclusive). The default passphrase is sharedsecret.

You can display the actual passphrase by selecting the Sh

ow Passphrase in Clear Text

radio button.

Show Passphrase

Clear Text

Select the Yes radio button to display the actual passphrase in the Passphrase field. The

default setting is No.

Table 12. WPA-PSK, WPA2-PSK, and WPA-PSK & WPA2-PSK Settings (Continued)

Field Descriptions

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 125 126

No comments

Netgear WNAP320 User's Guide Page 48