Netgear RangeMax WN802T User Manual download pdf (Page 83)

Default Settings and Technical Specifications A-1

v1.0, September 2008

Appendix A

Default Settings and Technical Specifications

This appendix provides the factory default settings and technical specifications for the NETGEAR

Wireless-N Access Point WN802T v2.

Factory Default Settings

You can use the Reset button located on the front of your device to reset all settings to their factory

defaults. This is called a hard reset.

• To perform a hard reset, push and hold the Reset button for approximately 5 seconds (until the

Power LED changes from blinking green to solid amber). Your device will return to the

factory configuration settings shown in Table A-1.

• Pressing the Reset button for a shorter period of time will simply cause your device to reboot.

Table A-1. Access Point Default Configuration Settings

Feature Description

AP Login

User Login URL 192.168.0.233

User Name (case sensitive) admin

Ethernet Connection

Ethernet MAC Address See rear label.

Access Point Mode On

Port Speed 10/100/1000 Mbps

Local Network (LAN)

Lan IP 192.168.0.233

Subnet Mask 255.255.255.0

Gateway Address 192.168.0.1

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 95 96

No comments

Netgear RangeMax WN802T User Manual Page 83