Netgear RangeMax WN802T User Manual download pdf (Page 26)

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual

2-6 Installation and Configuration

v1.0, September 2008

3. .Click Apply to save your settings.

To configure the Basic LAN settings:

1. Select IP under Configuration on the main menu. The IP Settings screen displays (see

Figure 2-4).The default settings should be suitable for most users and environments.

2. Enter the IP Settings fields of the WN802T v2.

– DHCP Client. By default, the Dynamic Host Configuration Protocol (DHCP) client is

disabled. If you have a DHCP server on your LAN you can enable DHCP and the wireless

access point will get its IP address, gateway and DNS server settings automatically when

you connect the WN802T v2 to your LAN.

– IP Address. Enter the IP Address of your wireless access point. The default IP address is

192.168.0.233. To change it, enter an unused IP address from the address range used on

your LAN; or enable DHCP.

– IP Subnet Mask. Enter the subnet mask based on the IP address that you assign. The

default is 255.255.255.0.

– Default Gateway. Enter the IP address of the gateway for your LAN. For more complex

networks, enter the address of the router for the network segment to which the wireless

access point is connected.

Figure 2-4 Basic IP settings

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 95 96

No comments

Netgear RangeMax WN802T User Manual Page 26