Netgear RangeMax WN802T User Manual download pdf (Page 27)

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual

Installation and Configuration 2-7

v1.0, September 2008

– Primary DNS Server. The WN802T v2 uses this IP address as the primary Domain Name

server used by stations on your LAN.

– Secondary DNS Servers. The WN802T v2 uses this IP address as the secondary Domain

Name Server used by stations on your LAN.

3. Click Apply to save your Basic IP settings.

Configuring Basic Wireless Settings

The following section describes how to configure the basic wireless settings for the 802.11b,

802.11/jointfilesconvert/35836/bg and 802.11ng modes.

To configure the NETGEAR Wireless-N Access Point wireless settings of your wireless access

point:

1. From the main menu under Configuration, select Wireless.The Wireless Settings screen

displays as shown in Figure 2-5.

Note: If you change the default subnet of the LAN IP address, you will be

disconnected from the NETGEAR Wireless-N Access Point user interface. To

reconnect, reconfigure your computer with a static IP address within the new

LAN IP subnet.

Figure 2-5 Basic wireless settings

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 95 96

No comments

Netgear RangeMax WN802T User Manual Page 27