Netgear RangeMax WN802T User Manual download pdf (Page 44)

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual

3-10 Wireless Security Settings

v1.0, September 2008

Configuring WPA2 with RADIUS

Not all wireless adapters support WPA2. Furthermore, client software is required on the client.

Make sure your client card supports WPA2. Consult the product document for your wireless

adapter and WPA2 client software for instructions on configuring WPA2 settings.

To configure WPA2 with RADIUS:

1. Under the Configuration tab, select Security on the main menu, select Advanced from the

side menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen

displays.

2. Enter the RADIUS settings as shown in “Configuring the RADIUS Server Settings” on

page 4-13.

3. Click Apply to save your RADIUS settings.

4. Under the Configuration tab, select Security from the main menu, and select Security

Settings from the side menu. From the Network Authentication drop-down menu, select

WPA2 with RADIUS from the list. By default, Data Encryption will be set to AES.

5. Wireless Client Security Separation is disabled by default. If enabled, associated wireless

clients will not be able to communicate with each other. (This feature is intended for hotspots

and other public access situations).

6. Click Apply to save your settings.

Figure 3-4 WPA2 with RADIUS security settings

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 95 96

No comments

Netgear RangeMax WN802T User Manual Page 44