Netgear RangeMax WN802T User Manual download pdf (Page 59)

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual

Management 4-7

v1.0, September 2008

The factory settings are restored and the access point reboots. This takes about a minute. A list of

the factory default settings can be found in the appendix in.Table A-1.

Viewing the Available Wireless Stations List

The Available Wireless Station list contains a table of all IP devices associated with this wireless

access point network defined by its wireless network name (SSID).

To view the list of available wireless stations:

1. From the Configuration menu of the browser interface, select Monitoring and then Wireless

Stations. The Available Wireless Stations list displays (see Figure 4-6).

2. Click Refresh to update the list and force the wireless access point to look for associated

devices.

• For each device, the Available Wireless Stations table shows data such as the MAC

address, the BSSID, and the SSID (not populated).

Warning: Do not try to go online, turn off the Access Point, shut down the

computer or do anything else to the Access Point until it finishes

restarting. When the PWR light turns green, wait a few more seconds

before doing anything with the Access Point.

Figure 4-6 Available wireless stations list

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 95 96

No comments

Netgear RangeMax WN802T User Manual Page 59