Netgear RangeMax WN802T User Manual download pdf (Page 56)

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual

4-4 Management

v1.0, September 2008

6. The WN802T v2 will check if the file is valid and load it in to the firmware. Once the file has

been loaded the AP reboots.

In some cases, it may be necessary to reconfigure the wireless access point after upgrading.

Configuration File Management

You can back up your configuration settings of the NETGEAR Wireless-N Access Point and

restore the factory default settings. Once you have your wireless access point working properly,

backing up the configured settings would be prudent should you have to perform a factory reset.

When you backup the settings, they are saved as a file on your computer that you can access to

restore the wireless access point’s configured settings.

To backup settings:

1. From the main menu of the browser interface, select Maintenance > Upgrade. Select Backup

Settings from the side menu. The Backup Settings screen displays:

2. Click BACKUP to select the backup option and save your configuration settings.

• If you do not have your browser set up to save downloaded files automatically, locate

where you want to save the file, rename it if you like, and click BACKUP.

• If you have your browser set up to save downloaded files automatically, the file will be

automatically saved to the download location

Warning: When uploading firmware to the WN802T v2, it is important not to

interrupt the Web browser by closing the window, clicking a link, or

loading a new page. If the browser is interrupted, the upload may fail,

corrupt the software, and render the WN802T v2 inoperable.

Figure 4-3 Backup configuration settings

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 95 96

No comments

Netgear RangeMax WN802T User Manual Page 56