Netgear RangeMax WN802T User Manual download pdf (Page 40)

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual

3-6 Wireless Security Settings

v1.0, September 2008

Record the WPA-PSK/WPA2-PSK key ___________________________________

• WPA RADIUS Settings. For WPA, record the following settings for the primary and

secondary RADIUS servers:

Server Name/IP Address: Primary _________________

Secondary __________________

Port: ___________________________________

Shared Secret: ___________________________________

RADIUS Server Settings

You can setup or modify the RADIUS server settings to complement network authentication

security options. The RADIUS server can be used with WPA/WPA2 network authentication.

When using a RADIUS server, the RADIUS server settings must be configured before completing

the Network Authentication security profile (see “Configuring WPA with RADIUS” on page 3-8,

“Configuring WPA2 with RADIUS” on page 3-10, or “Configuring WPA and WPA2 with

RADIUS” on page 3-11 for specifics on implementing these security options).

To set up or modify the RADIUS server settings see: “Configuring the RADIUS Server Settings”

on page 4-13.

Configuring Wireless Security

The following section covers configuration of each of the available wireless security options.

Configuring WEP

To configure WEP data encryption:

1. From the Network Authentication drop-down menu on the Securit Settings screen (see

Figure 3-1), select either Open System or Shared Key.

Note: The RADIUS server settings only need to be configured once per wireless access

point.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 95 96

No comments

Netgear RangeMax WN802T User Manual Page 40