Netgear RangeMax WN802T User Manual download pdf (Page 55)

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual

Management 4-3

v1.0, September 2008

Upgrading the Wireless Access Point Firmware

The software of the NETGEAR Wireless-N Access Point is stored in FLASH memory, and can be

upgraded as new software is released by NETGEAR. Firmware upgrade files can be downloaded

manually from the NETGEAR Web site. The upgrade file can then be sent using your browser as

shown in the following steps.

To upgrade the firmware:

1. Go to the NETGEAR web site at http://kbserver.netgear.com/downloads_support.asp to get

new versions of the WN802T v2 access point software.

2. Download the new software file for your WN802T v2 access point.

3. From the Maintenance menu of the browser interface, click Upgrade. The Firmware

Upgrade screen displays as follows:

4. Click Browse and go to the location of the downloaded file.

5. Click Apply.

Note: The Web browser used to upload new firmware into the NETGEAR Wireless-N

Access Point must support HTTP uploads, such as Microsoft Internet Explorer 6.0

or later, or Mozilla Firefox.1.5 or later.

Figure 4-2 Upgrade firmware - browse downloaded file

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 95 96

No comments

Netgear RangeMax WN802T User Manual Page 55