Netgear UTM5 User Manual Page 63

  • Download
  • Add to my manuals
  • Print
  • Page
    / 484
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 62
3-1
v1.0, January 2010
Chapter 3
Manually Configuring Internet and WAN Settings
This chapter contains the following sections:
“Understanding the Internet and WAN Configuration Tasks” on this page.
“Configuring the Internet Connections” on page 3-2.
“Configuring the WAN Mode (Required for Dual-WAN Port Models Only)” on page 3-9.
“Configuring Secondary WAN Addresses” on page 3-17.
“Configuring Dynamic DNS” on page 3-19.
“Configuring Advanced WAN Options” on page 3-22.
Understanding the Internet and WAN Configuration Tasks
Generally, five steps are required to complete the Internet connection of your UTM:
1. Configure the Internet connections to your ISP(s). During this phase, you connect to your
ISPs. You can also program the WAN traffic meters at this time if desired. See “Configuring
the Internet Connections” on page 3-2.
2. Configure the WAN mode (required for operation of the dual-WAN port models). For all
models, select either NAT or classical routing. For the dual-WAN port models only, select
either dedicated (single WAN) mode, auto-rollover mode, or load balancing mode. For load
balancing, you can also select any necessary protocol bindings. See “Configuring the WAN
Mode (Required for Dual-WAN Port Models Only)” on page 3-9.
3. Configure secondary WAN addresses on the WAN ports (optional). Configure aliases for
each WAN port. See “Configuring Secondary WAN Addresses” on page 3-17.
Note: The initial Internet configuration of the UTM is described in Chapter 2, “Using the
Setup Wizard to Provision the UTM in Your Network.” If you used the Setup
Wizard to configure your Internet settings, you need this chapter only to configure
WAN features such as Dual WAN and Dynamic DNS, and to configure secondary
WAN addresses and advanced WAN options.
Page view 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 483 484

Comments to this Manuals

No comments