Netgear UTM5 User Manual Page 131

  • Download
  • Add to my manuals
  • Print
  • Page
    / 484
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 130
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Firewall Protection 5-17
v1.0, January 2010
2. Click one of the following table buttons:
Disable. Disables the rule or rules. The “!” status icon changes from a green circle to a
grey circle, indicating that the rule is or rules are disabled. (By default, when a rule is
added to the table, it is automatically enabled.)
Delete. Deletes the rule or rules.
DMZ WAN Outbound Services Rules
You may change the default outbound policy or define rules that specify exceptions to the default
outbound policy. By adding custom rules, you can block or allow access based on the service or
application, source or destination IP addresses, and time of day. An outbound rule may block or
allow traffic between the DMZ and any external WAN IP address according to the schedule
created in the Schedule menu.
To create a new outbound DMZ WAN service rule:
1. In the DMZ WAN Rules screen, click the Add table button under the Outbound Services table.
The Add DMZ WAN Outbound Service screen displays.
2. Enter the settings as explained in Table 5-2 on page 5-5.
3. Click Apply. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
Figure 5-6
Page view 130
1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 483 484

Comments to this Manuals

No comments