Netgear UTM5 User Manual Page 437

  • Download
  • Add to my manuals
  • Print
  • Page
    / 484
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 436
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Network Planning for Dual WAN Ports (Dual-WAN Port Models Only) B-11
v1.0, January 2010
VPN Road Warrior (Client-to-Gateway)
The following situations exemplify the requirements for a remote PC client with no firewall to
establish a VPN tunnel with a gateway VPN firewall such as an UTM:
Single gateway WAN port
Redundant dual gateway WAN ports for increased reliability (before and after rollover)
Dual gateway WAN ports for load balancing
VPN Road Warrior: Single Gateway WAN Port (Reference Case)
In a single WAN port gateway configuration, the remote PC client initiates the VPN tunnel
because the IP address of the remote PC client is not known in advance. The gateway WAN port
must act as the responder.
The IP address of the gateway WAN port can be either fixed or dynamic. If the IP address is
dynamic, a FQDN must be used. If the IP address is fixed, a FQDN is optional.
VPN Road Warrior: Dual Gateway WAN Ports for Improved Reliability
In a dual-WAN port auto-rollover gateway configuration, the remote PC client initiates the VPN
tunnel with the active WAN port (port WAN1 in Figure B-10 on page B-12) because the IP address
of the remote PC client is not known in advance. The gateway WAN port must act as a responder.
Figure B-9
Page view 436
1 2 ... 432 433 434 435 436 437 438 439 440 441 442 ... 483 484

Comments to this Manuals

No comments