Netgear UTM5 User Manual Page 71

  • Download
  • Add to my manuals
  • Print
  • Page
    / 484
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 70
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Manually Configuring Internet and WAN Settings 3-9
v1.0, January 2010
8. Click Test to evaluate your entries. The UTM attempts to make a connection according to the
settings that you entered.
9. Click Apply to save any changes to the WAN1 ISP settings of a dual-WAN port model or
WAN ISP settings of a single-WAN port model. (Or, click Reset to discard any changes and
revert to the previous settings.)
10. For the dual-WAN port models only, if you intend to use a dual WAN mode, click the WA N2
ISP Settings tab and configure the WAN2 ISP settings using the same steps as WAN1.
When you are finished, click the Logout link at the upper right corner of the Web Management
Interface or proceed to additional setup and management tasks.
Configuring the WAN Mode (Required for Dual-WAN Port
Models Only)
On dual-WAN port models only, the dual-WAN ports of the UTM can be configured on a mutually
exclusive basis for either auto-rollover (for increased system reliability) or load balancing (for
maximum bandwidth efficiency), or one port can be disabled.
Auto-Rollover Mode. The selected WAN interface is defined as the primary link and the other
interface is defined as the rollover link. As long as the primary link is up, all traffic is sent over
the primary link. When the primary link goes down, the rollover link is brought up to send the
traffic. When the primary link comes back up, traffic automatically rolls back to the original
primary link.
Table 3-4. DNS Server Settings
Setting Description (or Subfield and Description)
Get Automatically
from ISP
If your ISP has not assigned any Domain Name Servers (DNS) addresses, select
the Get Automatically from ISP radio button.
Use These DNS
Servers
If your ISP has assigned DNS addresses, select the Use these DNS Servers
radio button. Ensure that you fill in valid DNS server IP addresses in the fields.
Incorrect DNS entries might cause connectivity issues.
Primary DNS Server The IP address of the primary DNS server.
Secondary DNS
Serve
The IP address of the secondary DNS server.
Page view 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 483 484

Comments to this Manuals

No comments