Netgear UTM5 User Manual Page 342

  • Download
  • Add to my manuals
  • Print
  • Page
    / 484
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 341
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
10-6 Network and System Management
v1.0, January 2010
LAN WAN Inbound Rules and DMZ WAN Inbound Rules (Port Forwarding)
The LAN WAN Rules screen and the DMZ WAN Rules screen list all existing rules for inbound
traffic (from WAN to LAN and from WAN to the DMZ). If you have not defined any rules, only
the default rule is listed. The default rule blocks all access from outside except responses to
requests from the LAN side. Any inbound rule that you create allows additional incoming traffic
and therefore increases the traffic load on the WAN side.
Each rule lets you specify the desired action for the connections covered by the rule:
•BLOCK always
BLOCK by schedule, otherwise Allow
ALLOW always
ALLOW by schedule, otherwise Block
The section below summarizes the various criteria that you can apply to inbound rules and that
might increase traffic. For more information about inbound rules, see “Inbound Rules (Port
Forwarding)” on page 5-6. For detailed procedures on how to configure inbound rules, see
“Setting LAN WAN Rules” on page 5-12 and “Setting DMZ WAN Rules” on page 5-15.
When you define inbound firewall rules, you can further refine their application according to the
following criteria:
Services. You can specify the services or applications to be covered by an inbound rule. If the
desired service or application does not appear in the list, you must define it using the Services
screen (see “Services-Based Rules” on page 5-3 and “Adding Customized Services” on
page 5-32).
WAN Destination IP Address. For the dual-WAN port models only, you can specify the
destination IP address for incoming traffic. Traffic is directed to the specified address only
when the destination IP address of the incoming packet matches the IP address of the selected
WAN interface (that is WAN1 or WAN2 interface). For the single-WAN port models, the
WAN Destination IP Address is a fixed field.
LAN Users. You can specify which computers on your network are affected by an inbound
rule. There are several options:
Any. All PCs and devices on your LAN.
Single address. The rule is applied to the address of a particular PC.
Warning: This feature is for advanced administrators only! Incorrect configuration
might cause serious problems.
Page view 341
1 2 ... 337 338 339 340 341 342 343 344 345 346 347 ... 483 484

Comments to this Manuals

No comments