Netgear UTM5 User Manual Page 298

  • Download
  • Add to my manuals
  • Print
  • Page
    / 484
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 297
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
8-26 Virtual Private Networking Using SSL Connections
v1.0, January 2010
If you enable split tunnel support and you assign an entirely different subnet to the VPN tunnel
clients than the subnet that is used by the local network, you must add a client route to ensure
that a VPN tunnel client connects to the local network over the VPN tunnel.
Configuring the Client IP Address Range
First determine the address range to be assigned to VPN tunnel clients, then define the address
range.
To define the client IP address range:
1. Select VPN > SSL VPN from the menu. The SSL VPN s submenu tabs appear, with the
Policies screen in view.
2. Click the SSL VPN Client submenu tab. The SSL VPN Client screen displays.
Figure 8-15
Page view 297
1 2 ... 293 294 295 296 297 298 299 300 301 302 303 ... 483 484

Comments to this Manuals

No comments