Netgear UTM5 User Manual Page 124

  • Download
  • Add to my manuals
  • Print
  • Page
    / 484
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 123
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
5-10 Firewall Protection
v1.0, January 2010
Log The settings that determines whether packets covered by this rule are logged. The
options are:
Always. Always log traffic considered by this rule, whether it matches or not. This is
useful when debugging your rules.
Never. Never log traffic considered by this rule, whether it matches or not.
Bandwidth Profile Bandwidth limiting determines the way in which the data is sent to and from your
host. The purpose of bandwidth limiting is to provide a solution for limiting the
outgoing and incoming traffic, thus preventing the LAN users from consuming all the
bandwidth of the Internet link. Bandwidth limiting occurs in the following ways:
For outbound traffic: on the available WAN interface in the single WAN port mode
and auto-rollover mode, and on the selected interface in load balancing mode.
For inbound traffic: on the LAN interface for all WAN modes.
Note: Bandwidth Limiting does not apply to the DMZ interface.
Note: Some residential broadband ISP accounts do not allow you to run any server
processes (such as a Web or FTP server) from your location. Your ISP might
periodically check for servers and might suspend your account if it discovers any
active services at your location. If you are unsure, see the Acceptable Use Policy of
your ISP.
Table 5-3. Inbound Rules Overview (continued)
Setting Description (or Subfield and Description)
Page view 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 483 484

Comments to this Manuals

No comments