Netgear UTM5 User Manual Page 139

  • Download
  • Add to my manuals
  • Print
  • Page
    / 484
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 138
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Firewall Protection 5-25
v1.0, January 2010
6. In the Send to LAN Server field, enter the local IP address of your Web server PC (192.168.1.2
in this example).
7. For the dual-WAN port models only: from the WAN Destination IP Address pull-down menu,
select the Web server (the simulated 10.1.0.52 address in this example) that you first must
have defined on the WAN1 Secondary Addresses or WAN2 Secondary Addresses screen (see
“Configuring Secondary WAN Addresses” on page 3-17).
For the single-WAN port models, the WAN Destination IP Address is a fixed field.
8. Click Apply to save your settings. Your is now added to the Inbound Services table of the
LAN WAN Rules screen.
To test the connection from a PC on the Internet, type http://<IP_address>, where <IP_address>
is the public IP address that you have mapped to your Web server. You should see the home page
of your Web server.
LAN WAN or DMZ WAN Inbound Rule: Specifying an Exposed Host
Specifying an exposed host allows you to set up a computer or server that is available to anyone on
the Internet for services that you have not yet defined.
To expose one of the PCs on your LAN or DMZ as this host:
1. Create an inbound rule that allows all protocols.
2. Place the rule below all other inbound rules.
See an example in Figure 5-14 on page 5-26..
Warning: For security, NETGEAR strongly recommends that you avoid creating an
exposed host. When a computer is designated as the exposed host, it loses
much of the protection of the firewall and is exposed to many exploits from
the Internet. If compromised, the computer can be used to attack your
network.
Page view 138
1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 483 484

Comments to this Manuals

No comments