Netgear LG2200D User's Guide download pdf (Page 125)

Set Up an Ethernet WAN Internet Connection

125

U.S. Cellular® 4G LTE™ Router (LG2200D)

2. Enter http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADV

ANCED > Advanced Setup > IPv6.

The IPv6 screen displays.

5. In the Internet Connection

Type list, select 6to4 Tunnel.

The screen adjusts:

The router automatically detects the information in the Router’s IPv6 Address On LAN

field.

This field shows the IPv6 address that is acquired for the router’s LAN interface. The

number after the slash (/) is the length of the prefix, which is also indicated by the

underline (_) under the IPv6 address. If no address is acquired, the field displays Not

vailable.

6. Configure the remote 6to4 relay router settings by selecting one of the following buttons:

• Auto.

Your router uses any remote relay router that is available on the Internet. This

is the default setting.

• Static IP

Address. Enter the static IPv4 address of the remote relay router. This

address is usually provided by your IPv6 ISP.

7. Specify how the router assigns IPv6 addresses to the devices on your home network (the

LAN) by selecting one of the following radio buttons:

• Use DHCP Server.

This method passes more information to LAN devices, but some

IPv6 systems might not support the DHCv6 client function.

• Auto Config.

This is the default setting.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 134 135

No comments

Netgear LG2200D User's Guide Page 125