Netgear LG2200D User's Guide download pdf (Page 128)

Set Up an Ethernet WAN Internet Connection

128

U.S. Cellular® 4G LTE™ Router (LG2200D)

IPv6 DHCP

 To set up an IPv6 Internet connection with a DHCP server:

1. Launch an Internet browser from a computer or wireless device that is connected to the

network.

2. Enter http://www

.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADV

ANCED > Advanced Setup > IPv6.

The IPv6 screen displays.

5. In the Internet Connection

Type list, select DHCP.

The screen adjusts:

The router automatically detects the information in the following fields:

• Router

’s IPv6 Address On WAN. This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the length

of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no

address is acquired, the field displays Not Available.

• Router

’s IPv6 Address On LAN. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6. Specify how the router assigns IPv6 addresses to the devices on your home network (the

LAN) by selecting one of the following radio buttons:

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 134 135

No comments

Netgear LG2200D User's Guide Page 128