Netgear LG2200D User's Guide download pdf (Page 48)

Specify Network Settings

U.S. Cellular® 4G LTE™ Router (LG2200D)

Specify the IP Addresses that the Router Assigns

By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The

router assigns IP, DNS server, and default gateway addresses to all computers connected to

the LAN. The assigned default gateway address is the LAN address of the router.

These addresses must be part of the same IP address subnet as the router’s LAN IP

address. Using the default addressing scheme, define a range between 192.168.0.2 and

192.168.0.254, although you can save part of the range for devices with fixed addresses.

 To specify the pool of IP addresses that the router assigns:

1. Launch an Internet browser from a computer or wireless device that is connected to the

network.

2. Enter http://www

.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADV

ANCED > Setup > LAN Setup.

5. Make sure that the Use Router as DHCP Server check box is selected.

6. Specify the range of IP addresses that the router assigns:

a. In the Starting IP

Address field, type the lowest number in the range.

This IP address must be in the same subnet as the router.

b. In the Ending IP

Address field, type the number at the end of the range of IP

addresses.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 134 135

No comments

Netgear LG2200D User's Guide Page 48