Netgear LG2200D User's Guide download pdf (Page 59)

Specify Network Settings

U.S. Cellular® 4G LTE™ Router (LG2200D)

In some regions, not all channels are available. Do not change the channel unless you

experience interference (shown by lost connections or slow data transfers). If this

happens, experiment with different channels to see which is the best.

When you use multiple access points, it is better if adjacent access points use different

channels to reduce interference. The recommended channel spacing between adjacent

access points is four channels (for example, use Channels 1 and 5, or 6 and 10).

10. To change the mode, select it from the Mode list.

Up to 145 Mbps is the default setting, which allows 802.11n and 802.11g wireless devices

to join the network. The other settings are Up to 54 Mbps, and Up to 300 Mbps.

11. Click the Apply button.

Your settings are saved.

If you connected wirelessly to the network and you changed the SSID, you are

disconnected from the network.

12. Make sure that you can connect wirelessly to the network with its new settings.

If you cannot connect wirelessly, check the following:

• Is your computer or wireless device connected to another wireless network in your

area? Some wireless devices automatically connect to the first open network without

wireless security that they discover.

• Is your computer or wireless device trying to connect to your network with its old

settings (before you changed the settings)? If so, update the wireless network

selection in your computer or wireless device to match the current settings for your

network.

Change the WiFi Security Option

Your router comes with preset WPA2 or WPA security. The password that you enter to

connect to your network is unique to your router and is on the router label. NETGEAR

recommends that you use the preset security, but you can change them. NETGEAR

recommends that you do not disable security.

 To change the WPA settings:

1. Launch an Internet browser from a computer or wireless device that is connected to the

network.

2. Enter http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 134 135

No comments

Netgear LG2200D User's Guide Page 59