Netgear LG2200D User's Guide download pdf (Page 66)

Specify Network Settings

U.S. Cellular® 4G LTE™ Router (LG2200D)

Set Up a Repeater

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless

connection to the base station.

If you are using the router as the base station with a non-NETGEAR router as the repeater,

you might need to change more configuration settings. In particular, disable the DHCP server

function on the access point that is the repeater.

 To configure a NETGEAR router as a repeater:

1. Launch an Internet browser from a computer or wireless device that is connected to the

network.

2. Enter http://www

.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select W

ireless and verify that the wireless settings match the base unit exactly.

The wireless security option must be set to None.

5. Select ADV

ANCED > Wireless Repeating Function.

6. Select the Enable W

ireless Repeating Function check box.

7. Select the W

ireless Repeater radio button.

8. In the Repeater IP Address field, type the IP address of the repeater router.

This IP address must be in the same subnet as the base station, but different from the

LAN IP address of the base station.

9. T

o prevent wireless clients from associating with the repeater and allowing LAN client

associations only, select the Disable Wireless Client Association check box.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 134 135

No comments

Netgear LG2200D User's Guide Page 66