Netgear LG2200D User's Guide download pdf (Page 49)

Specify Network Settings

U.S. Cellular® 4G LTE™ Router (LG2200D)

This IP address must be in the same subnet as the router.

7. Click the Apply button.

Your settings are saved.

The router delivers the following parameters to any LAN device that requests DHCP:

• An IP address from the range that you have defined.

• Subnet mask.

• Gateway IP address (the router’s LAN IP address).

• DNS server IP address (the router’s LAN IP address).

Disable the DHCP Server Feature in the Router

By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default

gateway addresses to all computers connected to the LAN. The assigned default gateway

address is the LAN address of the router.

You can use another device on your network as the DHCP server, or specify the network

settings of all your computers.

 To disable the DHCP server feature in the router:

1. Launch an Internet browser from a computer or wireless device that is connected to the

network.

2. Enter http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADVANCED > Setup > LAN Setup.

5. Clear the Use Router as DHCP Server check box.

6. Click the Apply button.

7. (Optional) If this service is disabled and no other DHCP server is on your network, set your

computer IP addresses manually so that they can access the router.

Reserve LAN IP Addresses

When you specify a reserved IP address for a computer on the LAN, that computer always

receives the same IP address each time it accesses the router’s DHCP server. Assign

reserved IP addresses to computers or servers that require permanent IP settings.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 134 135

No comments

Netgear LG2200D User's Guide Page 49