Netgear WC7600 User Manual download pdf (Page 38)

System Planning and Deployment Scenarios

ProSAFE Wireless Controller WC7600

• Four VLANs: VLAN 10, VLAN 20, VLAN 30, and VLAN 40

• Three SSIDs: SSID 1, SSID 2, and SSID 3

In this scenario, the VLANs and SSIDs are used to accommodate traffic for different user

groups in a school that is spread out over two buildings.

• Building 1:

- SSID 1 in VLAN 10 for staff traffic

- SSID 2 in VLAN 20 for middle school students

- SSID 3 in VLAN 30 for guests

• Building 2:

- SSID 1 in VLAN 10 for staff traffic

- SSID 2 in VLAN 40 for high school students

- SSID 3 in VLAN 30 for guests

Backend L3 switch

or router

WC7600

Core switch

PoE switch

WNDAP360

Internet

Staff VLAN 10 Ethernet traffic

Middle school VLAN 20 Ethernet traffic

High school VLAN 40 Ethernet traffic

Guest VLAN 30 Ethernet traffic

Building 1

Building 2

SSID 1 Staff VLAN 10

SSID 2 Middle school VLAN 20

SSID 3 Guest VLAN 30

SSID 1 Staff VLAN 10

SSID 2 High school VLAN 40

SSID 3 Guest VLAN 30

Redundant WC7600

Figure 11. Example: Advanced network

The access points and wireless controllers are connected in the same subnet and same

VLAN and use the same IP address range that is assigned for that subnet. The core switch is

located between the wireless controllers and the PoE switches, to which the access points

are connected. The core switch provides Internet access.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 306 307

No comments

Netgear WC7600 User Manual Page 38