Netgear WC7600 User Manual download pdf (Page 230)

Manage Stacking and Redundancy

230

ProSAFE Wireless Controller WC7600

Configure a Stack

A stack can consist of up to three wireless controllers, one of which is the master controller

and two of which are slave controllers.

The following procedure assumes that you have already configured the system settings,

profiles, security settings, and wireless settings on the master controller, and that you have

already configured the system settings on the slave controller.

 To create a stack by adding a slave controller to a wireless controller that functions as

the master controller:

1. Open a web browser. In the browser’s address field, type the http:// followed by the IP

address that you assigned to the wireless controller.

By default, the IP address is 192.168.0.250. If you have not yet assigned another IP

address to the wireless controller, type http://192.168.0.250.

The wireless controller’s login screen displays.

2. Enter your user name and password.

If you have not yet personalized your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

3. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

4. Select Stacking > Stacking.

The Stacking screen displays:

The Stacking table shows the master wireless controller with its IP addresses.

5. Click the Add button.

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 306 307

No comments

Netgear WC7600 User Manual Page 230