Netgear WC7600 User Manual download pdf (Page 62)

Configure the System and Network Settings and Register the Licenses

ProSAFE Wireless Controller WC7600

The Time Settings screen displays:

5. Configure the settings as described in the following table:

Setting Description

Time Zone From the menu, select the local time zone for your country or region.

Current Time This field is a nonconfigurable field that displays the current time at your

location.

NTP Client Select the Enable radio button to use a Network

Time Protocol (NTP) server to

synchronize the clock of the wireless controller and managed access points.

Select the Disable radio button if you do not want to use an NTP server

Use Custom NTP Server Select the Use Custom NTP Server check box if you want to use an alternate

NTP server

. By default, the NETGEAR NTP server is used.

Hostname/IP Address Enter the host name or IP address of the NTP server, if you are using a custom

NTP server

6. Click the Apply button.

Manage the IP, VLAN, and Link Aggregation Settings

You can manage the IP address, VLAN settings, and link aggregation (LAG) settings of the

wireless controller.

Management VLAN Concepts

Management VLANs are used for all SNMP and HTTP traffic to and from the wireless

controller and managed access points.

For large deployments, NETGEAR recommends that the wireless controller and access

points are in separate VLANs to ensure uninterrupted connectivity between the wireless

controller and the access points.

The wireless controller and access points share heartbeat messages to keep synchronized

and share configurations and client key data to facilitate seamless roaming.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 306 307

No comments

Netgear WC7600 User Manual Page 62