Netgear WC7600 User Manual download pdf (Page 79)

Configure the System and Network Settings and Register the Licenses

ProSAFE Wireless Controller WC7600

Configure Alarm Notification Settings

You can classify certain events as critical, major, normal, or minor. Some events you can

classify only as critical or major. For example, on the RF Management screen, you can

specify whether a coverage hole should be classified as critical or major (see Configure

Radio Frequency Management for the Basic Profile Group on page 181).

 To configure alarm actions:

1. Open a web browser

. In the browser’s address field, type the http:// followed by the IP

address that you assigned to the wireless controller.

By default, the IP address is 192.168.0.250. If you have not yet assigned another IP

address to the wireless controller, type http://192.168.0.250.

The wireless controller’s login screen displays.

2. Enter your user name and password.

If you have not yet personalized your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

3. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

4. Select Configuration

> System > Alerts/Logs > Alarms.

The Alarm Actions screen displays:

5. For each alarm severity (Minor, Normal, Major, and Critical), select the desired action from

its corresponding Action menu.

• No Action. When the alarm occurs, no action is taken.

• Add T

o Syslog. When the alarm occurs, the wireless controller adds an entry to the

syslog.

• Send Email. When the alarm occurs, the wireless controller sends an email.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 306 307

No comments

Netgear WC7600 User Manual Page 79