Netgear WC7600 User Manual download pdf (Page 202)

Maintain the Wireless Controller and Access Points

202

ProSAFE Wireless Controller WC7600

If you have not yet personalized your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

4. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

5. Select Maintenance > Upgrade > Firmware Upgrade.

The Firmware Upgrade screen displays. The following figure shows the fields that display

when you select the FTP radio button. When you select the TFTP or Local File radio

button, fewer fields are shown.

6. Configure the settings as described in the following table:

Setting Description

TFTP, FTP, or Local File Select one of the following radio buttons to specify from which location the

upgrade should occur

. The screen adjusts to display the fields that are required

for each upgrade location.

• TFTP. Upgrade from a

TFTP server. The Server IP and File Name server

parameters fields display.

• FTP. Upgrade from an FTP server

. The Server IP, File Name, User Name,

and Password server parameters fields display.

• Local File. Upgrade from a local file that you have downloaded.

The

server parameter fields do not display, but the Browse button becomes

available.

To select the firmware upgrade file from your computer, follow the

directions of your browser

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 306 307

No comments

Netgear WC7600 User Manual Page 202