Netgear WC7600 User Manual download pdf (Page 138)

Discover and Manage Access Points

138

ProSAFE Wireless Controller WC7600

4. Select Configuration > WLAN Network.

The settings are explained in the following table:

Setting Description

IP The IP address of the access point.

MAC The MAC address of the access point.

Model The model of the access point.

Name The name that you specified for the access point.

Building The building designation is always Building-1.

Floor The floor designation is always Floor-1.

Status • Authentication in progress. This

status can last several minutes.

• Applying configurations.

• Firmware upgrade.

• AP is rebooting.

• Connecting. Make sure that a DHCP server is enabled in the network;

otherwise, the managed access points remain in the Connecting state and do

not enter the Connected state.

• Connected. This

status indicates normal operation.

• Not Connected.

The wireless controller cannot communicate with the access

point at the configured IP address. The wireless controller tries to log in to

managed access points each minute. If the error is temporary, the status

automatically changes to Connected. If the error is prolonged, verify the access

point’s IP address and network connectivity. For more information, see Resolve

Problems with Access Points on page 300.

Remote The site designation is always Local.

Group Name The profile group to which the access point is assigned.

For information about creating profile groups and their associated security profiles,

see Manage Security Profiles for Advanced Profile Groups on page 91.

Tip: To view all members of a profile group, sort the access points by

profile group. You do this by clicking the icon next to the Group Name

header in the table.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 306 307

No comments

Netgear WC7600 User Manual Page 138