Netgear WC7520 User Manual Page 88

  • Download
  • Add to my manuals
  • Print
  • Page
    / 213
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 87
Managing Security Profiles and Profile Groups
88
ProSafe 20-AP Wireless Controller WC7520
Figure 41.
The displayed settings are explained in the following table:
Table 18. WLAN group assignments
Setting Description
IP The IP address of the access point.
MAC The MAC address of the access point.
Model The model of the access point.
Name The name that you specified for the access point.
Building The building in which the access point is located. For more information, see Define
and Edit Buildings and Floors on p
age 42 and Edit and Remove Access Point
Information on page 59.
Floor The floor on which the access point is l
ocated. For more information, see Define and
Edit Buildings and Floors on page 42 and Edit and Remove Access Point Information
on page 59.
Status The access point connectivity st
atus.
Authentication in progress. (This status can last several minutes)
App
lying configurations.
Firmwar
e upgrade.
AP is
rebooting.
Con
necting.
Con
nected. This status indicates normal operation.
Not Co
nnected. The wireless controller cannot communicate with the access point
at the configured IP address. The wireless controller tries to log in to managed
access points each minute. If the error is temporary, the status automatically
changes to connected. If the error is prolonged, verify the access point’s IP
address and network connectivity.
Note: Make sure that there is a DHCP server ena
bled in the network; otherwise, the
managed access points remain in the Connecting state and do not enter the
Connected state.
Page view 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 212 213

Comments to this Manuals

No comments